Sep 5th, 2008, 4:43pm
   FabulaTech Forum
   USB Solutions
   USB over Network (Moderators: Keith, Andrew, Mike)
   USB from a com to usb conector		 « Previous topic | Next topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print
   Author  Topic: USB from a com to usb conector  (Read 1497 times)
danieljackmorley
FabulaTech Forum Newbie
*





   
View Profile

Posts: 1
USB from a com to usb conector
« on: Sep 19th, 2007, 1:07pm »		 Quote Quote Modify Modify
I am trying to use a com to usb connector to read the text transmitions that com from a com port.  I am using a usb connector to talk to the comport.  Will USB monitor send the text to a fill in the network that can be read in the format that one will expect for a serial port.  If so how do you set up the software to read the com port.
IP Logged
Andrew
FabulaTech Forum Moderator
FabulaTech Forum Senior Member
*****






   
View Profile WWW

Gender: male
 Posts: 425
Re: USB from a com to usb conector
« Reply #1 on: Sep 21st, 2007, 7:30am »		 Quote Quote Modify Modify
Daniel, I suppose that there is virtual COM port created by com to usb connector. So, you can open that COM port by HyperTerminal to see the data.
 
USB Monitor Pro also shows the serial data but you will see headers also. So, I recommend you use any port monitoring software, like portmon.
 
Thanks!
IP Logged
Andrew Scott

FabulaTech
===================
http://www.fabulatech.com
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print

« Previous topic | Next topic »