Aug 8th, 2008, 11:17am
   FabulaTech Forum
   Serial Port Solution
   Virtual Serial Port Kit for Windows CE (Moderators: Keith, Andrew)
   Not working on Yakumo Omikron ?		 « Previous topic | No topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print
   Author  Topic: Not working on Yakumo Omikron ?  (Read 865 times)
TWKunze
FabulaTech Forum Newbie
*





   
View Profile

Posts: 1
Not working on Yakumo Omikron ?
« on: May 24th, 2006, 12:10am »		 Quote Quote Modify Modify
I got the trial of Virtual Serial Port Kit CE 4.7.2 but don't get it to work on a Yakumo Omikron.
It has Windows Mobile 2003 installed, and I plan to use a small tracking tool, that receives GPS-information via SMS, and hand the info out to a map software via a virtual COM port.  
So I created the new pair of COM2 --> VCP1 (COM2 is free and available). I switched it on, left vspk open (in another test I closed the program).
The tracking tool gets the message, the map software works fine, but the info won't go to COM2.
 
The same setup works perfectly on a T-Mobile MDA1 (also WM 2003) though.
 
Can you please help?
 
Thank you and
regards from Berlin, Germany
Thomas
IP Logged
Andrew
FabulaTech Forum Moderator
FabulaTech Forum Senior Member
*****






   
View Profile WWW

Gender: male
 Posts: 425
Re: Not working on Yakumo Omikron ?
« Reply #1 on: May 24th, 2006, 3:22am »		 Quote Quote Modify Modify
At first you need to define where is a problem. You can try to install the Serial and Telnet Communications Software in your Yakumo Omikron device. Look at here for example:
 
http://www.cam.com/vxhpc.html
 
Can you connect two copies of Serial Communication Software via virtual null modem pair created by our Virtual Serial Port Kit CE product and are you able to send/receive data via the such setup?
IP Logged
Andrew Scott

FabulaTech
===================
http://www.fabulatech.com
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print

« Previous topic | No topic »